Matrix Switching System
—
User Manual
8
4.0 Device Installation
The Matrix Switching device has a black metallic housing. It can be placed on a sturdy
desk directly or installed on a 19-in bracket. See Figure 4-1 below:
Figure 4-1 mounts the Device on a Standard Bracket with 2U Rack-mount
5.0 Front/Rear Panels
5.0.1 Front Panel
Figure 5-1 AX-88 Front Panel
The AX-88 Matrix Switching System supports up to 8 Output/Input switching keys on the
Front Panel allowing you to switch signals quickly.
There are four kinds of button combinations as below:
Operation method No. 1:
“
Output Channel
”
+
“
Input Channel
”
Press the Output key then select the Input key to set the combinations.
Operation method No. 2:
“
STO
”
+
“
Output/Input Channel
”
Press the STO key then select the Output/Input key. Refer to
Operation method No. 3:
“
RCL
”
+
“
Output/Input Channel
”
Press the RCL key then select the Output/Input key to retrieve the combinations.
Operation method No. 4:
Single Operation
This example is for audio configuration keys, click the VOL+, VOL-, MENU, MUTE,
Or
key directly.
OUT1~8 keys
(output channel)
:
Specify the Channel 1~Channel 8 for audio signal
output to broadcast peripherals. These keys configure the status/access the settings.
IN1~8 keys
(input channel)
:
Specify the Channel 1~Channel 8 for audio signal input.
Use these keys to switch to the connected input signal source channels.