ZETA AP
6
5. Installation
5.1. Installation safety notice
It is forbidden to operate with electricity when installing, wiring and
dismantling the equipment.
Place the equipment in a ventilated place to ensure that the equipment
is installed in a dry environment.
Avoid placing the equipment in a high temperature or low temperature
environment.
The installation location of the equipment should be far away from
high-voltage cables to avoid electromagnetic interference during
operation.
The equipment should be far away from the environment of strong
thunderstorm and strong electric field.
Please fix the equipment firmly.
5.2. Installation environment check
The RF antenna is installed vertically, and there should be no large
metal shields such as metal pillars, large metal boxes, etc. within 1
meter around (the upper and lower metal will not affect it).
The installation location needs to consider the power supply of the
equipment. This equipment uses AC100 ~ 240V, a 2-hole power
adapter, and the power cord is 3 meters in length.
5.3. Installation tool
Before installing the equipment, prepare the following installation tools
and auxiliary materials:
Name
No. Use Case
Screwdriver
1
For AP bracket, antenna, hoop and other screws
Wrench(#10)
1
For fixing screw nuts
Expansion screw
few Used for equipment installation
Electric percussion
drill
1
For wall turning for the expansion screw
Tool pliers
1
Used to screw the ground wire
Strapping tape
few For wire fixing
Summary of Contents for APTG-GI01
Page 1: ...ZETA AP 1 ZETA AP...
Page 11: ...ZETA AP 10...
