ZIEHL UFR1001E, Operating Manual, Page: 14 / 45

UFR1001E 12420-0701-08 Page 14 / 45 www.ziehl.de
8. Commissioning
8.1 Program setup
The suitable program must be set on the UFR1001E in accordance with the application. If the
UFR1001E is sealed/locked (red LED illuminated), the sealing has to be deactivated first.
Pr Connection Treshold Values Voltage Country / Standard
*1 3 AC with N
Low voltage
1x over voltage,
1x under voltage
1x over frequency, 1x under frequency
10 min average value, 1x vector shift
1x ROCOF
230V
VDE-AR-N 4105
2 3 AC without N 400V
7 2/1 AC with N 230V
3 3 AC with N
Medium voltage
2x over voltage,
2x under voltage
2x over frequency, 2x under frequency
10min mean value, 1x vector shift
1x ROCOF
57,7V
BDEW Juni 2008
nach 3.2.3.3-1
4 3 AC without N 100V
5
3/2/1 AC with
N
230V
6 3 AC without N 400V
10
3/2/1 AC
with N
1x overvoltage, 1x under voltage
1x over frequency, 1x under frequency
10 min average value, 1x vector shift
1x ROCOF
230V
ÖVE/ÖNORM
E 8001-4-712
20
3/2/1 AC
with N 2x over voltage, 2x under voltage
2x over frequency, 2x under frequency
10min mean value, 1x vector shift
1x ROCOF
230V
G83/2 + G59/3
21 3 AC without N 400V
22 3 AC with N 57,7V
23 3 AC without N 100V
* default setting
Adjustment process:
If present, remove seal (only authorised person)
Apply control supply voltage at A1-A2
Slightly lift the key cover and turn 180°
Actuate the small blue button by firmly pressing the button cover (LED starts flashing) until
the green LED is illuminated.
Sealing is deactivated
Press button 1x display 8 8
Press button 5x display 8 8
Set the program with the buttons
Press button 1x display 8 8
Press button 1x display 8 8
Press button
Device resets and starts with the newly selected program
Hint:
Only change the parameters after having selected the correct
program.