9 Functional test on microswitch/inductive proximity switch for re-
lease monitor
After mounting of the brake, a functional test must be performed on the micro switches/inductive
proximity switches (see chapter "Brake operating instructions - release monitor" at the original operat-
ing instructions).
If the function is not available, please check the causes that may prevent the actuation of the micro
switches/inductive proximity switches (see chapter "Brake operating instructions - release monitor" in
the appendix). The micro switches/inductive proximity switches will otherwise have to be readjusted
(see the chapter "Assembly and adjustment of release monitor with micro switches or inductive
proximity switches" in the appendix at the original operating instructions).
10 Adjustment of the microswitch/inductive proximity switch for re-
lease monitor
Figure 10-01
Figure 10-02
Adjustment of the microswitches/inductive proximity switches is only necessary if they are not working
correctly.
The microswitches/inductive proximity switches are located on top of the brake (see arrow).
ATTENTION! It must be ensured that the appropriate microswitches/inductive proximity
switches are selected for the magnet to be adjusted.
Adjustment of the release monitor with microswitches/inductive proximity switches, see
“
Assembly
and adjustment of release monitor with microswitches or inductive proximity switches
”
chapter in the
appendix at the original operating instructions.
11 Disposal / recycling
Disposal must be carried out professionally and environmentally friendly in accordance with the legal
stipulations.
Assembly instructions
–
model series ZAtop Functional test on microswitch/inductive proximity switch for release
monitor
A-TIA20_10-GB 2027 Index 002
Part.-No. 01013487-GB
15/16
