8 Mounting the brake
During the mounting as well as the dismounting also the operating manual of the brake has to be
observed.
Risk of death!
Incorrect mounting can have a detrimental impact on the braking action.
Caution!
"
"
Never touch the connection contacts on the position absolute encoder or on the cable! The electronics can be
destroyed by static electricity.
"
"
You must discharge your own body before touching. This can be done, for example, by touching a conductive,
earthed object (for example bare metal switch cabinet parts) immediately before.
Figure 8-01
Figure 8-02
1. Ensure that the friction lining of the brake rotor 1 (17), the braking surface (B) on the
fl
ange
bearing bracket and the toothed hub (C) on the drive shaft are free of dirt and grease. Perform
cleaning with a micro-active cloth and quick cleaner LOCTITE
®
7063.
2. Lightly grease the O-ring (17A) with technical Vaseline and insert into the groove of the brake
rotor 1 (17).
Figure 8-03
Figure 8-04
3. Slide the brake rotor 1 (17) with the O-ring (17A) onto the toothed hub (C) by hand by exerting
light pressure.
ATTENTION!
Make sure that the shorter rotor collar is facing towards the machine wall.
4. Make sure that the gear teeth engage easily.
5. O-ring may not be damaged.
6.
Caution!
Due to the great weight of the brake body, we recommend you to secure and change the
brake body by using an eye bolt M12 (A ) and appropriate lifting gear.
Assembly instructions
–
model series ZAtop
Mounting the brake
A-TIA20_10-GB 2027 Index 002
Part.-No. 01013487-GB
10/16
