In particular, the operator must ensure that
"
the elevator machine is used as intended (see chapter
“
Product overview
”
)
"
the installation is operated in a
fl
awless, functional condition and the safety devices are periodically
checked for their properly functioning condition
"
The required personal safety gear is available to and used by the operating, maintenance and
repair personnel
"
the operating instructions are available at the location where the elevator machine is being used,
are complete and are in legible condition
"
suf
fi
ciently quali
fi
ed and authorized personnel operate, maintain and repair the elevator machine
"
these personnel receive regular instruction in all relevant industrial safety and environmental
protection issues and are familiar with the operating instructions and the safety instructions they
contain
"
all safety and warning notices attached to the elevator machine are never removed and remain
legible
2.8
Employment of external personnel
Maintenance and service work are frequently carried out by external employees who often do not
recognize the speci
fi
c situations and the thus resulting dangers.
These persons must be comprehensively informed about the hazards in their area of activity.
You must monitor their working methods in order to intervene in good time if necessary.
3 Product overview
3.1
Operational area
The ZAtop SM250.60B is designed as a gearless elevator machine for traction sheave rope elevators.
Owing to its very compact design, the ZAtop SM250.60B is ideal for machine roomless elevators.
The type-tested brake can be used as a:
•
Brake mechanism acting on the drive shaft as part of the ascending car overspeed protection
means
•
Brake element acting on the drive shaft as part of the protection against unintended car movement
3.2
Name plate
The name plate for the ZAtop SM250.60B drives specify two values as nominal values for maximum /
average nominal power, maximum / average nominal current, maximum / average nominal torque and
on time at maximum / average load.
The
fi
rst values in each case represent the maximum load for operation of the elevator (descending
with empty car or ascending with full car). The second values stand for the average load for operation
of the elevator.
The name plate is on the brake-side on the left and right on the housing of the ZAtop SM250.60B.
Figure 3-2-01
Example name plate ZAtop SM250.60B
Figure 3-2-02
Position of the name plate
Original operating instructions
ZAtop
–
model series SM250.60B
Product overview
A-TBA20_02-GB 2032 Index 003
Part.-No. 01013399-GB (EU-BD 783)
8/72
