1 General notes
1.1 Structure of the operating instructions
Before installation and start-up, read this manual carefully to ensure correct use!
We emphasize that these operating instructions apply to speci
fi
c units only, and are in
no way valid for the complete system!
Use these operating instructions to work safely with and on the device. They contain
safety instructions that must be complied with as well as information that is required for
failure-free operation of the device.
Keep these operating instructions together with the device. It must be ensured that all
persons that are to work on the device can refer to the operating instructions at any time.
1.2 Exclusion of liability
To allow for future developments, construction methods and technical data given are
subject to alteration. We do not accept any liability for possible errors or omissions in the
information contained in data, illustrations or drawings provided.
We accept no liability for damage caused by misuse, incorrect use, improper use or as a
consequence of unauthorized repairs or modi
fi
cations.
2 Safety instructions
•
Installation, electrical connection and commissioning to be carried out by trained
service personnel only. The speci
fi
cations of the manufacturer or supplier, and
instructions relating to the equipment, should be rigidly adhered to. Failure to comply
with these conditions will invalidate the guarantee on our controllers and accessories!
•
The 5 electrical safety rules must be observed!
•
It is strictly forbidden for work to be carried out on any components while they are
connected to live voltage. The open equipment is protected to IP00. It is possible to
come into direct contact with dangerous voltages!
•
The safe isolation from the supply must be checked using a
two-pole
voltage
detector.
•
Cover neighbouring electrical equipment during installation work.
•
During operation, the device must be closed or installed in a control cabinet. Fuses
may only be replaced by new ones and must not be repaired or bypassed. The data
for the maximum line fuse are to be considered absolutely (see Technical data). Use
only fuses speci
fi
ed in schematic diagrams.
•
Never clean electrical equipment with water or similar liquids.
•
The equipment is to be used solely for the purposes speci
fi
ed and con
fi
rmed in the
order. Other uses which do not coincide with, or which exceed those speci
fi
ed will be
deemed unauthorised unless contractually agreed. Damages resulting from such
unauthorised uses will not be the liability of the manufacturer. The user will assume
sole liability.
•
During commissioning, unexpected and hazardous conditions can arise in the entire
installation due to defective adjustments, defective components or incorrect electrical
connections. Remove all persons and objects from the hazardous area.
Operating Instructions
R-E-1.5...14G, RUE-2...7.5G
General notes
L-BAL-E191-GB 1735 Index 003
Part.-No.
3/12