background image

1 General notes

1.1 Structure of the operating instructions

Before installation and start-up, read this manual carefully to ensure correct use!

We emphasize that these operating instructions apply to speci

c units only, and

are in no way valid for the complete system!

Use these operating instructions to work safely with and on the device. They contain

safety instructions that must be complied with as well as information that is required for

failure-free operation of the device.

Keep these operating insturctions together with the device. It must be ensured that all

persons that are to work on the device can refer to the operating instructions at any time.

Keep the operating instructions for continued use. They must be passed-on to all

successive owners, users and

nal customers.

1.2 Target group

The operating instructions address persons entrusted with planning, installation, com-

missioning and maintenance and servicing and who have the corresponding quali

ca-

tions and skills for their job.

1.3 Exclusion of liability

Concurrence between the contents of these operating instructions and the described

hardware and software in the device has been examined. It is still possible that non-

compliances exist; no guarantee is assumed for complete conformity. To allow for future

developments, construction methods and technical data given are subject to alteration.

We do not accept any liability for possible errors or omissions in the information con-

tained in data, illustrations or drawings provided.

Ziehl-Abegg AG is not liable for damage due to misuse, incorrect use, improper use or

as a consequence of unauthorized repairs or modi

cations.

1.4 Copyright

These operating instructions contain copyright protected information. The operating

instructions may be neither completely nor partially photocopied, reproduced, translated

or put on data medium without previous explicit consent from Ziehl-Abegg AG. Infringe-

ments are liable for damages. All rights reserved, including those that arise through

patent issue or registration on a utility model.

2 Safety instructions

This chapter contains instructions to prevent personal injury and property damage.

These instructions do not lay claim to completeness. In case of questions and problems,

please consult our company technicians.

Operating Instructions

NETcon

model series DIG-9NE

General notes

L-BAL-E134-GB 1118 Index 001

Part.-No. 00163363-GB

4/21

Summary of Contents for NETcon DIG-9NE






















Reviews: