8.3 Menu group PIN
PIN EDIT
PIN required
XXXX
PIN
Inserting the PIN is intended to prevent accidental alterations to the NETcon and its operating
characteristics. The PIN is deleted automatically if no key is pressed within 15 minutes, also after
a voltage reset or after the insertion of an incorrect PIN.
PIN EDIT
PIN o.k.
XXXX
PIN input
After pressing [
P
] choose the numerics with the arrow keys. The PIN is accepted by pressing [
P
].
If the correct PIN was inserted, other menus be activated (PIN for installation: 0010).
Information
The PIN cannot be changed so that a service engineer has access to the system at any
time.
8.4 Menu group FAN SET
FAN SET
edit connected
ECblue
01 - 05
FAN SET
Settings for individual fans
After pressing [
P
], the
fi
rst fan is displayed. With the arrow keys, the remaining installed fans can
be displayed.
FAN SET 01 ON
901rpm Speed
900rpm SetIntern1
NO ERROR V01.06
Speed
(only information menu)
Chapter "FAN INFO"
Operating Instructions
NETcon
A-G-102ANE
Programming
L-BAL-E156-GB 2105 Index 004
Part.-No.
25/32
