1 General notes
Compliance with the following speci
fi
cations also serves to ensure product safety.
Should the speci
fi
ed information, in particular with regard to general safety, transporta-
tion, storage, assembly, operating conditions, commissioning, service, maintenance,
cleaning and disposal/recycling not be observed, safe operation of the product may not
be guaranteed and can potentially pose a risk of death or injury to users and/or third
parties.
For this reason, deviations from the speci
fi
cations below can lead to the loss of legal
materials defect liability as well as to liability of the buyer for the product rendered unsafe
by deviation from the speci
fi
cations.
1.1 Validity
This document is valid for ECblue-axial fans of motor size
U
(060).
The used motor size is recognisable from the type designation (see rating plate).
e.g. type: FN023-4QA.
U
A.V5P3
In the case of fans with the quality mark (see rating plate), please note the related
speci
fi
cations depending on the application location!
1.2 Structure of the assembly instructions
Before installation and start-up, read this assembly instructions carefully to ensure
correct use!
We emphasize that these assembly instructions apply to speci
fi
c units only, and are in
no way valid for the complete system!
Use these assembly instructions to work safely with and on the device. They contain
safety instructions that must be complied with as well as information that is required for
failure-free operation of the device.
Keep these assembly instructions together with the device. It must be ensured that all
persons that are to work on the device can refer to the assembly instructions at any time.
Keep the assembly instructions for continued use. They must be passed-on to all
successive owners, users and
fi
nal customers.
1.3 Target group
The assembly instructions address persons entrusted with planning, installation, com-
missioning and maintenance and servicing and who have the corresponding quali
fi
ca-
tions and skills for their job.
1.4 Exclusion of liability
Concurrence between the contents of these assembly instructions and the described
hardware and software in the device has been examined. It is still possible that non-
compliances exist; no guarantee is assumed for complete conformity. To allow for future
developments, construction methods and technical data given are subject to alteration.
We do not accept any liability for possible errors or omissions in the information con-
tained in data, illustrations or drawings provided.
Assembly instructions
FE2owlet-ECQ
General notes
L-BAL-F062-GB 2022/20 Index 004
Part.-No. 00702389-GB
4/24