1.4 Using in the USA or Canada
Information
The following information is intended for using the product in the USA or Canada and is
therefore not taken into consideration in translations.
1.4.1 FCC Statements for US @ AM-MODBUS-WB, AM-STICK-WB
FCC Notice
This device contains
FCC ID: T7V1740 (PAN1740)
, including the antennas, which are
listed below, complies with Part 15 of the FCC Rules.
The device meets the requirements for modular transmitter approval as detailed in FCC
public Notice DA00-1407 transmitter.
Operation is subject to the following two conditions
1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may
cause undesired operation
Caution
The FCC requires the user to be noti
fi
ed that any changes or modi
fi
cations made to this
device that are not expressly approved by ZIEHL-ABEGG SE may void the user's
authority to operate the equipment.
Changes or modi
fi
cations not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help
Labeling Requirements
The Original Equipment Manufacturer (OEM) must ensure that FCC labelling require-
ments are met. This includes a clearly visible label on the outside of the OEM enclosure
specifying the appropriate Panasonic FCC identi
fi
er for this product as well as the FCC
Quick Start Guide
AM-STICK-WB
General notes
L-BAL-E289-GB 1822 Index 003
Part.-No.
5/19
