INSALLATION / OPERATION
24
Roller type
Diameter (mm)
Length (M)
Crumbling roller
270
1.5m
Crumbling roller
330
1.5m
Fig. 13
Track eradicator (option)
Track eradicators can be attached to the beams.
The track eradicators can be moved laterally and
are depth-adjustable.
Set the track eradicators to the track of the tractor
as follows:
−
Raise the device to relieve the track eradicators.
−
Loosen the stirrup screws of the bracket.
−
Move the bracket with track eradicator on the
beam into the desired position.
−
Tighten the bracket screw.
Operation
The working depth of the track eradicator should
be set c. 5 cm lower than the track of the tractor.
Adjust the working depth of the track eradicator
as follows:
−
Raise the device to relieve the track eradica-
tors.
−
Hold the track eradicator with your hand.
−
Loosen the set-screw of the bracket
−
Slide the track eradicator into the desired posi-
tion.
−
Fix the track eradicator again via the set-screw.
Fig. 12
Crumbling roller
The seedbed combination is equipped with a tan-
dem crumbling roller as standard. The rollers are
rigidly mounted on the machine and provide relia-
ble support on the ground. The working depth is
adjusted via the parallelogram guide of the tine
field (see 6. Operation-> Working depth tine field).
The high circumferential speeds, different diame-
ters and the toothed flat bars of the rollers achieve
intensive crumbling.
Clean dirty crumbling rollers before road travel.
