30
5.2
Screw conveyor / feeder
Fig. 20
Auger
The screw conveyors are fitted with conveyor fin-
gers (K) in the area of the channel opening to
transport the crop.
The number of conveyor fingers (K) can differ for
the individual pick-up models and depends on the
feed channel width of the respective thresher.
Fig. 21
Screw conveyor drive
The screw conveyor timing chain can be tightened
with a special chain tensioner.
The voltage condition should be checked every 100
hours of operation.
Turn off the engine and remove the ig-
nition key from the combine to per-
form this operation.
K
