Page 34
4K UHD Hi-end Media player
❶ RCA, XLR output
Using a pair of RCA or XLR balanced analog audio cables to connect NEO X with active
speaker or HiFi amplifier.
Note：
*
NEO X is equipped with two independent stereo output ports: RCA-type and XLR-type
balanced ports can output audio signals simultaneously. Generally only choosing one of
these ports is enough, and it is recommended to choose XLR balanced port to obtain better
noise suppression and signal integrity.
*
NEO X's balanced output is a three-pin XLR male port, which will output differential signals
pair (positive/negative signals). The amplifier circuit can compare the voltage difference of
signals pair to cancel common mode noise and improve the integrity of the original signal.
*
In some audio systems, the positive and negative polarities are reversed. The default
positive polarity are shown below. If you need to reverse the polarity, please set it in the
system:
Settings > DAC audio > XLR Port Polarity > Reverse
RCA-type audio cable
XLR balanced audio cable
Stereo HiFi audio system
(HiFi headphone amplifier
/Active monitor speaker)
Positive polarity d system positive setting
Negative polarity d system negative setting
+
+
-
-
GND
GND