background image

 

Appendix B 

 FCC Information 

 

 

FCC Radiation Exposure Statement  

This equipment complies with FCC radiation exposure limits set forth for an 

uncontrolled environment. This equipment should be installed and operated with 
minimum distance 20centimeters between the radiator and your body.   

 

The equipment has been tested and found to comply with the limits for a Class B 

Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction, may cause harmful interference 
to radio communication. However, there is no grantee that interference will not occur 
in a particular installation. If this equipment dose cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one or more of the following 
measures: 

 

--Reorient or relocate the receiving antenna. 
--Increase the separation between the equipment and receiver. 
--Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

--Consult the dealer or an experienced radio/TV technician for help. 
 
Notice: The Part 15 radio device operates on a non-interference basis with other 

devices operating at this frequency. Any changes or modification not 
expressly approved by the party responsible could void the user’s authority to 
operate the device. 

 

 

46 

Summary of Contents for VCTnet AirXpress UC11B






















































Reviews: