Page
16
[I]
Floppy Drive Connector
A 34-pin connector on-board allows connection to two 360K, 720K, 1.2M, 1.44, 2.88M floppy disk drives.
[L]
PCI Add-in Board Connectors
This motherboard provides full-length 32-bits PCI slots with up to 133MB/sec burst data transfer rate.
[M]
ISA Add-in Board Connectors
This motherboard provides 16-bits ISA slots which allows backward hardware compatibility.
[O]
Front Panel Function Connector
For you convenience, all the front panel functions are integrated into a single connector, which included power
LED and keyboard lock, turbo switch, reset switch, SMI switch and speaker.
[Q]
WAKEUP-LINK Interface
This header is used to connect an add-in NIC (Network Interface Card) which has WOL capability to a
motherboard.
[S]
IDE Connectors
This motherboard have two independent high performance bus-mastering PCI IDE interfaces capable of
supporting up to UltraDMA-66 devices. The system BIOS supports automatic detection of the IDE device data
transfer rate and translation between different kinds of device mode such as Logical Block Addressing (LBA)
and Extended Cylinder Sector Head (ECSH) translation modes and ATAPI (e.g., CD-ROM) devices on both
IDE interfaces.
In a true multi-tasking operating systems like Windows
98, the IDE interface can operate as a PCI bus master
capable of supporting Ultra DMA-66 devices with transfer rates of up to 66MB/sec.
[T]
Pentium
®
Type-7 Socket
The type-7 socket is a 321-pins, zero insertion force (ZIF) socket. It provides users with a performance upgrade
path to Pentium
®
OverDrive technology.
[V]
VGA Connector
PENTIUM
PROCESSOR
An approved Pentium heatsink is necessary for proper thermal dissipation in an AT compliant
chassis. The processor/heatsink assembly must be securely fastened to the Socket 7 ZIF socket
by two clips. These clips fit over the heatsink assembly and attach to the outer wide tabs of the
Socket 7 assembly.
