Zida P845SD, User Manual

Page: 24 / 59

Page 24 Mainboard User's Manual
Typematic Delay (Msec)
When holding down a key, the time between the first and second character
display, this option specifies the numbers of times of character repeat on the
screen. The default setting is "250".
Security Option
This option limits the access to the system and Setup or just to Setup.
When you select "System", the system will not boot and access to CMOS
Setup. A correct password must be entered at the prompt. The default
setting is "Setup".
APIC Mode
You can "Enabled" or "Disabled" APIC .When Enabled,User can program the
interrapt controler.
MPS Version Control For OS
The Option allows to selct MPS version control for OS,available setting are
1.1and 1.4,Default is "1.1".
OS Select For DRAM > 64MB
Some of the OS/2 application access the memory in different mode. Enable
this option to allow the system use another mode to access the main memory
for OS/2 applications.
Report No FDD For Win95
When setting this option to "YES", system can release the IRQ for other
peripherals. This option should be "No", when the floppy driver is installed
in the system.
Small Logo (EPA) show
When setting this option to "Enabled",Small Logo(EPA) show.When Disabled,
Logo EPA wil not show.