Zida P845SD, User Manual

Page: 23 / 59

Mainboard User's Manual Page 23
BIOS
Setup
Boot Other Device
This feature allows you to select other boot device automatically.
Swap Floppy Drive
This feature allows you to enable the system swap floppy function, the
default is "Disabled". When this function enables, the system will assign
the Drive A as Drive B, and vice versa.
Boot Up Floppy Seek
This default setting is "Enabled", so that the BIOS will search for floppy
disk drive during boot up. If disabled, BIOS will not search for the type
of floppy disk drive by track number. Note that there will be no warning
message if the drive installed is 360K.
Boot Up NumLock Status
It determines the Num-Lock LED on keyboard is turned on/off. When the
system is powered on so that the end user can use the arrow keys on both
the numeric keypad and the keyboard. The default value is "On".
Gate A20 Option
This entry allows you to enable the A20 address line access. The default
is "FAST".
Typematic Rate Setting
Typematic Rate sets the rate at which characters on the screen repeat.
The default setting is "Disabled".
Typematic Rate (Chars/Sec)
Typematic rate sets the rate at which characters on the screen repeat
when a key is pressed and held down. You can select 6-30 characters per
second. The default setting is "6".