manualshive.com logo in svg

Zida GX3D-CM, User Manual

Share
Download
Zida GX3D-CM User Manual Download Page 20

glossary

Onboard Serial Port 1/Port 2

This item allows you to determine access onboard serial port 1/port 2 controller with
which I/O address.

The Choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.

IR IRQ Address

The Choice: Disable, 3F8H, 2F8H

IR Mode

This item allows you to determine which Infra Red (IR) function of onboard I/O chip.

The Choice: Standard, ASKIR, HPSIR.

IR IRQ Select

The Choice: Disable, IRQ3,IRQ4,IRQ10,IRQ11

Onboard Parallel Port Mode

Select an operating mode for the onboard parallel (printer) port.  Normal EPP
(Extended Parallel Port) ECP (Extended Capabilities Port) CEP+EPP PC AT paral-
lel port Bidirectional port Fast, buffered port Fast, buffered, bidirectional port.

Select Normal unless you are certain your hardware and software both sup

Onboard Parallel Port

Select a logical LPT port name and matching address for the physical parallel

(printer) port. 

The choice: 378H/IRQ7, 278H/IRQ5, 3BCH/IRQ7, Disabled.

port EPP or ECP mode.

Choices are SPP, ECP/EPP, ECP, EPP/SPP.

ECP  Mode  Use DMA

Select a DMA channel for the port.

Choices are 3, 1.

Parallel Port EPP Type

Select EPP port type 1.7 or 1.9.

Choices are EPP1.7, EPP1.9

Page 

38

Mainboard User's Manual

Summary of Contents for GX3D-CM

























Reviews:

No comments

Brands by name

Popular brands

Load more brands