:
Continuity m :milli (10
-3
) (volts, amps) k: kilo (10
3
) (ohms)
:
Diode test
M: mega (10
6
) (ohms)
Ohms
:
Battery status AC: Alternating current DC: Direct current
:
Auto Power OFF A:
Amps V: Voltage
Safety
This symbol adjacent to another symbol, terminal or operating
device indicates that the operator must refer to an explanation in
the Operating Instructions to avoid personal injury or damage to
the instrument.
This symbol advises the user that the terminal(s) so marked
must not be connected to a circuit point at which the voltage with
respect to earth ground exceeds (in this case) 600 VAC or VDC.
This instrument has been designed for safe use, but must be operated with
caution. The rules listed below must be carefully followed for safe operation.
1.
NEVER
apply voltage or current to the meter that exceeds the specified
maximum:
2.
USE EXTREME CAUTION
when working with high voltages.
3.
DO NOT
measure voltage if the voltage on the "COM" input jack exceeds
1000V above earth ground.
4.
ALWAYS
turn off the power and disconnect the test leads before opening
the covers to replace the fuse or batter
5. If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
MAX
1000
V