13
2. Now, set the Auto/Manual switch to Auto mode for
one-persontesting.
3. Read the test results from the LED display on remote
terminator.
Note:
The LED display on the remote unit will scan in
sequencecorresponding to the transmitting end of the
master unit.
Sample Test Results
1 2 3 4 5 6 7 8 G
1. Continuity: Pin 2 has continuity
1 2 3 4 5 6 7 8 G
2. Open: Pin 2 is opened
1 2 3 4 5 6 7 8 G
3. Short: Pin 2 and Pin 3 are shorted
1 2 3 4 5 6 7 8 G
4. Miswire: Pin 3 and Pin 6 are miswired
Caution:
1. Operating the tester in live circuits may damage the tester
2. Leaving the battery in the tester for long periods of time
without use could drain power from the battery
