background image

K

THE 'FUEL' INDICATOR LIGHT

When the FUEL indicator light lights up, there is enough fuel left for another 10

minutes of heater use. The count-down of the remaining heating time can be seen

in the information display 

M

(Fig. K). Every two minutes an alarm signal is

sounded, warning you to refill the removable tank. If you do not react, the heater

will extinguish by itself. The heater will also sound a warning signal, when it

switches off. The FUEL indicator light will blink, while four lines are blinking in the

information display. You can stop this by pressing the ON/OFF button 

N

once.

Once the heater has used up all its fuel and extinguished, it will take some time,

after the refill, before the heater is completely ready for use again.

L

THE 'VENT' INDICATOR LIGHT

When the VENT indicator light starts blinking, this is a sign that the room is not

vented sufficiently (Fig. L). If you do not provide additional ventilation, the heater

will switch off automatically after some time.

If the indicator light continues blinking after extra ventilation, please contact your

Zibro Kamin dealer.

M

MAINTENANCE

Switch off the heater and let it cool down, before you start any maintenance

work. Also disconnect the plug from the mains.

Your Zibro Kamin needs hardly any maintenance. It is, however, important that

you clean the air filter 

8

and the vent filter 

9

with a vacuum cleaner and the grid

with a damp cloth, both on a weekly basis. Remove the air filter occasionally

(Fig. M) and clean it with soapy water. Prior to reinstallation, make sure that the

air filter has fully dried. 

Regularly inspect the fuel filter as well:

Remove the removable tank 

7

from the heater and remove the fuel filter 

(Fig. N). Some drops may leak from the filter; keep a cloth at hand.

Remove the dirt by tapping the fuel filter upside-down against a hard surface. 

(Never clean it with water!)

Reinstall the fuel filter into the heater.

We recommend that you remove dust and stains in time with a damp cloth,

because otherwise these may cause stains that are hard to remove.

Do not remove any heater components yourself. Always contact your Zibro

Kamin dealer for repairs. When the power cord is damaged, it may only be

replaced by an authorised fitter. Use a new cord of the type H05 VV-F.

3

2

1

4

29

N

M

fuel filter

UEL

VENT

T E M P

CLOCK

TIMER

2 0 : 1 5

SET  ROOM

L: A blinking VENT

indicator light is a sign

that you need extra

ventilation.

ER

FUEL

VE

2 0 :

1 0

SET  ROOM

K: When the FUEL

indicator light is lit, the

information display will

show the number of

minutes of fuel left in 

the tank.

Summary of Contents for Laser



































Reviews: