28. Loosen thumbscrew on
finderscope mounting slot.
29. Slide finderscope bracket
into mounting slot with
open end of bracket facing
the objective end of the
telescope (objective end is
the open end of the optical
tube).
30. Tighten thumbscrew on
finderscope mounting slot.
A
SSEMBLING
YOUR
T
ELESCOPE
F
INDERSCOPE
A
SSEMBLY
26. Locate finderscope, finderscope
bracket, and o-ring.
27. Slide o-ring over small end of
finderscope and into groove.
27
31. Pull tension knob on
finderscope bracket.
32. Slide narrow end
of finderscope into
bracket with wide end
of finderscope facing
the objective end of
telescope.
33. Release tension
knob on finderscope
bracket.
30
32
31
U
SING
YOUR
T
ELESCOPE
I
NSTALLING
/R
EMOVING
1.25“ E
YEPIECES
You are now ready to use your telescope. Make certain that you remove the
dust cover on the optical tube prior to viewing.
1. Remove dust cover from eyepiece
holder.
2. Loosen thumbscrew on the eyepiece
holder.
3. Remove covers from 1.25’’ format
eyepiece.
4. Slide chrome end of eyepiece into
eyepiece holder.
5. Tighten thumbscrew to hold
eyepiece in place.
6. View through eyepiece and focus as
needed.
7. Loosen the thumbscrew.
8. Remove the eyepiece from the
holder.
9. Replace covers on eyepiece
for storage.
1
4
Summary of Contents for Dobsonian
Page 1: ...DOBSONIAN TELESCOPES...
