3-Wire Power Cord Installation
•
Remove the Terminal Block Access Plate on the back
of range by removing the fixing screw.
•
Assemble the strain relief in the hole on bracket.
•
Insert the power cord through the strain relief and
tighten.
•
Allow enough slack to easily attach the cord terminals
to the terminal block.
•
Remove the 3 wire terminal bolts and washers from
the terminal block.
•
Plug the terminal holes of power cord. The ground
wire of the power cord must be connected to the
ground terminal located at the left of the terminal
block. The power leads must be connected to the
other two terminals.
•
Plug washers and tighten bolts securely.
•
Assemble the Terminal Block Access Plate.
Screw
Terminal Block
AAcessccess Plate
Terminal Block
Power Wire2
E
L2
L1
Power Wires1
Power Cord
Bracket
4-Wire Power Cord Installation
•
Remove the Terminal Block Access Plate on the back
of range by removing the fixing screw.
•
Assemble the strain relief in the hole on bracket.
•
Insert the power cord through the strain relief and
tighten.
•
Allow enough slack to easily attach the cord terminals
to the terminal block.
•
Remove the 3 wire terminal bolts and washers from
the terminal block.
•
Remove the ground wiring of the range from the
neutral terminal at the left of the terminal block.
Terminal Block
Grounding Screw
Grounding Wire
N
L2
L1
Power Wires
E
Neutral Wire
Power Cord
Bracket
•
Plug the terminal holes of power cord. The neutral wire of the power cord must be connected
to the neutral terminal located at the left of the terminal block. The ground wires of the power
supply cord and the range must be attached to the frame of range by using the green-colored
grounding screw. The power leads must be connected to the other two terminals.
•
Plug washers and tighten bolts securely.
•
Assemble the Terminal Block Access Plate.
●
When do electrical connection, please refer to the rating label,
the rating label was location near the entrance of power supply
cord.
12
Rating
label
