Zhone zNID-GE-2402, Configuration Manual

Page: 92 / 226

Configuration
92
zNID 24xx Series Configuration Guide
Access control
Access control lists define whether packets/frames from source IP addresses
or source MAC addresses are allowed in on an interface.
Note that firewall rules, access control and port forwarding, require the
firewall feature to be enabled.
Lists
There are three options for defining whether packets/frames will be allowed
in on an interface — disabled, black list and white list. An interface may only
have one of the three listing options:
•
Black list defines a set of source IP addresses/MAC addresses which will
not be allowed. All other packets will be allowed.
•
White list defines a set of source IP addresses/MAC addresses which will
be allowed. All other packets will be blocked.
•
Disabled allows all packets/frames.
The Fiber WAN uplink is unsupported because filtering is not allowed on this
interface.
Figure 64: Defining whether the interface will be disabled, have a black list or a
white list