manualshive.com logo in svg

Zhone zNID-GE-2402, Configuration Manual

Share
Download
Zhone zNID-GE-2402 Configuration Manual Download Page 13

zNID 24xx Series Configuration Guide

13

 

Z

NID 24

XX

 S

ERIES

This chapter describes the zNID 24xx. It includes the following sections:

•

Overview, page 13

•

zNID 24xx series components, page 16

•

zNID 24xx models and interfaces, page 17

Overview 

The zNID 24xx Series (Zhone Network Interface Device) is a family of 
indoor, full-featured gateways for residential installations. These next 
generation zNIDs support GPON or Active Ethernet termination to meet the 
demands of multi-service network deployments to the user.

With either GPON or Active Ethernet uplinks, the 24xx Series zNIDs deliver 
data, voice, or video (IPTV) over fiber. 

The 24xx series of zNIDs share a common software architecture with the 
42xx and 9xxx series of zNIDs, including the same intuitive Web interface 
and command line interface. The zNID can also be managed by the Zhone 
Network Management System (ZMS) which uses SNMP. Software upgrades 
and configuration backups can be handled automatically by the ZMS using 
the EZ Touch management feature.

The zNID is a full-featured gateway supporting services such as DHCP 
server, rate limiting, filtering, comprehensive logging, and more. The zNID 
product line implements a very flexible QoS allowing the service provider to 
guarantee that services are being prioritized correctly and the end-user 
receives the Quality of Experience that is expected.

All 24xx series Single Family Unit (SFU) ONTs provide the same voice 
features found on the 42xx series of outdoor residential SFU ONTs and the 
9xxx series of Multiple Dwelling Unit (MDU) ONTs. SIP-PLAR signaling is 
supported for connection via Zhone's Voice Gateway to traditional Class 5 
TDM switches, while both MGCP and SIP are supported for direct connection 
to a VoIP Softswitch. This flexibility allows Zhone's 9xxx, 42xx and 24xx 
Series ONTs to work in nearly all Telco networks, with interoperability 
support for a broad array of Softswitches.

Zhone’s GPON ONTs are commonly are used in the 20km range with other 
GPON ONTs in the distribution network, though can reach up to 60km 
depending on the configuration of the optical distribution network (ODN).

Summary of Contents for zNID-GE-2402



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands