48
SkyZhone 1600, 1400, 1200 Hardware Install Guide
EMI Notices
Please refer to the following EMI notices.
United States - EMI Notice
•
Changes or modifications not expressly approved by Zhone Technologies, Inc. could void the
user's authority to operate the equipment.
•
The supplied cables and antennae must be used to ensure compliance with Part 15 and Part 90,
FCC Rules.
•
This device may only be used with approved antennae that are shipped with the unit and installed
per installation instructions. The use of any other antennas will invalidate the unit's FCC Part 15
certification.
•
The 2.4 GHz band has been designed to operate with the antennae listed below, and having a
maximum gain of 5 dBi. Antennae not included in this list (Comet Part Number CFA-245W-SR) or
having a gain greater than 5 dBi are strictly prohibited for use with this device. The required
antenna impedance is 50 ohms.
•
The 4.9 GHz band has been designed to operate with the antennae listed below, and having a
maximum gain of 5.3 dBi. Antennae not included in this list (Comet Part Number SF-D49NW-SR) or
having a gain greater than 5.3 dBi are strictly prohibited for use with this device. The required
antenna impedance is 50 ohms.
•
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication. Operating the device with the supplied antennas will ensure that this
requirement is met.
•
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Canada - EMI Notice
This Class A and C digital apparatus complies with Industry Canada RSS-210.
