5
Mounting and Balancing
Mount the tripod to the bottom of the WEEBILL 3S handle, then unfold the tripod
and place the WEEBILL 3S on a flat surface.
Mounting the Tripod
Mounting the Camera
1. Each axis of the gimbal is equipped with a lock switch. You can use these lock
switches to lock the axes for convenient installation and storage. The storage
state is the default state. Please toggle the lock switch to unlock the three
axes, expand the gimbal as shown in the image, and lock the axes again for
convenient camera installation.
Locked state for storage
Locked state for installation
① Please mount the camera before powering on WEEBILL 3S and balance the
gimbal. Do not power on WEEBILL 3S when there’s no camera mounted on
it.
② Before mounting the camera, make sure it is prepared ahead of time.
Remove the lens cap and make sure the camera’s battery and memory
card are already in place.
