24
How to Use WEEBILL 3S
① When adjusting the motor torque, make sure that the lock switches of the
three axes on the gimbal are turned on, and the gimbal is upright and
placed on level ground.
② If a load is changed, please readjust the balance and adjust the power
values using the method mentioned above.
③ It is recommended to use auto-calibration first. If auto-calibration fails to
meet your requirements, you can use custom settings to fine-tune the
values. If the above two methods still do not meet your requirements, use
the level adjustment to select the power.
Bluetooth Shutter Control
WEEBILL 3S supports Bluetooth shutter control, which allows you to wirelessly
control the camera shutter without connecting a camera control cable. Before
connecting the camera Bluetooth to WEEBILL 3S, please turn on the camera's
Bluetooth and enter pairing mode. Then press the menu/return button on
WEEBILL 3S to enter the main menu, rotate the fill light control wheel and select
Bluetooth shutter control, and single press the fill light control wheel to confirm.
WEEBILL 3S will then automatically search for the camera Bluetooth name. Select
the Bluetooth name that needs to be connected, press the control wheel to
confirm the connection, and finally confirm the connection on the camera.
① After WEEBILL 3S and the camera complete pairing and successfully
connect Bluetooth for the first time, they can automatically connect to
Bluetooth next time.
② When WEEBILL 3S and the camera are connected through both camera
control cables and Bluetooth at the same time, the gimbal prioritizes
controlling the camera function through the camera control cable.
3. Level
Three motor torque levels from low to high are provided based on the combined
weight of mainstream camera lenses available on the market. Users can select
the corresponding motor torque level according to the weight of their camera
and lens.
Operation steps:
Press Menu/Return button and rotate the fill light control
wheel to select “Motor torque”. Press the control wheel to enter the next menu
and rotate the control wheel to select “level”. Press the control wheel to enter
the next menu, select your desired level and press the control wheel to confirm.
When the display screen shows the “
√
” mark, the selection is complete.
