background image

35

Disclaimer and Warning

Reading Tips

Warnings

Thank you for purchasing WEEBILL 2. The information contains herein affects 
your safety, legitimate rights and obligation. Please read this instruction carefully to 
ensure proper configuration before use. Failure to read and follow this instruction 
and warnings herein may result in serious injury to you or bystanders, or damage to 
your device or property. Guilin Zhishen Information Technology Co., Ltd (hereinafter 
referred to as "ZHIYUN") reserves all rights for final explanation on this instruction and 
other documents related to WEEBILL 2. The information is subject to update without 
notice. Please visit www.zhiyun-tech.com to obtain the latest product information.
By using this product, you hereby signify that you have read this document carefully 
and that you understand and agree to abide by the terms and conditions herein. You 
agree that you are solely responsible for your own conduct while using this product, 
and for any consequences thereof. You agree to use this product only for purposes 
that are proper and in accordance with all terms, precautions, practices, policies and 
guidelines ZHIYUN has made and may make available.
ZHIYUN accepts no liability for damage, injury or any legal responsibility incurred 
directly or indirectly from the use of this product. Users shall observe safe and lawful 
practices including, but not limited to, those set forth herein.

ZHIYUN ™,TransMount ™ are the trademark of Guilin Zhishen Information 

Technology Co., Ltd and its affiliates. All product names or trademarks referred to 
herein are trademarks or registered trademarks of their respective holders.

Read the ENTIRE User Guide to become familiar with the features of this product 
before operating. Failure to operate the product correctly can result in damage to 
the product or personal property and cause serious injury. This is a sophisticated 
product. It must be operated with caution and common sense and requires some 
basic mechanical ability. Failure to operate this product in a safe and responsible 
manner could result in injury or damage to the product or other property. This 
product is not intended for use by children without direct adult supervision. DO 
NOT use with incompatible components or in any way otherwise as mentioned or 
instructed in the product documents provided by ZHIYUN. The safety guidelines 
herein contain instructions for safety, operation and maintenance. It is essential 
to read and follow all of the instructions and warnings in the User Guide, prior to 
assembly, setup or use, in order to operate the product correctly and avoid damage 
or serious injury.

Legends                Hints and Tips             Important    

Summary of Contents for WEEBILL 2














































Reviews: