background image

2

zhiyun-tech.com

Disclaimer and Warning

Glossary

The following terms are used throughout the product literature to indicate various levels of potential harm 
when operating this product.

WARNING:  Procedures, which if not properly followed, may incur property damage, grave accident, or 

serious injury.

CAUTION:  Procedures, which if not properly followed, may incur property damage and serious injury.
NOTICE:  Procedures, which if not properly followed, may incur property damage or minor injury.

Thank you for using ZHIYUN EVOLUTION. The information contains herein affects your safety and your legal 
rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. 
Failure to read and follow the instructions and warnings herein may result in serious injury to you or bystanders, 
or damage to your device or property.
ZHIYUN reserves the right of final explanation for this document and all relevant documents relating to 
EVOLUTION, and the right to make changes at any time without notice. Please visit www.zhiyun-tech.com for 
the latest product information.
By using this product, you hereby signify that you have read this document carefully and that you understand 
and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your 
own conduct while using this product, and for any consequences thereof. You agree to use this product only 
for purposes that are proper and in accordance with all terms, precautions, practices, policies and guidelines 
ZHIYUN has made and may make available.
ZHIYUN ™ accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from 
the use of this product. Users shall observe safe and lawful practices including, but not limited to, those set 
forth herein.
ZHIYUN ™ is the trademark of Guilin Zhishen Information Technology Co., Ltd. (hereinafter referred to 
as "ZHIYUN" or "ZHIYUN TECH") and its affiliates. All product names or marks referred to hereunder are 
trademarks or registered trademarks of their respective holders.

Summary of Contents for Evolution































Reviews: