19
Using the CRANE 2S
When using the CRANE 2S, you have to adjust the appropriate motor velocity parameters
according to the weight of your camera and lens, so that the CRANE 2S can be used in
its ideal state. We recommend using automatic tuning first. The definitions and operation
methods of the three motor torque methods are as follows:
Auto torque adjustment:
Automatically adjusts the power of the motor according to the
weight of the camera and lens.
Operation method:
Press the menu button, turn the dial to “Motor Torque”, and press the
right button once to select it. Turn the dial again to select “auto”, and press the right button
once to confirm. The gimbal will now enter auto torque adjustment. Do not interfere with the
gimbal. After the gimbal vibrates for a short while, the display panel will show the "√" icon,
indicating that the auto torque adjustment is complete.
Custom:
The power determines the torque of the motor, and needs to be adjusted
according to the load on the gimbal. The power should be proportional to the weight of the
load. A high power value will cause the gimbal itself to vibrate, while a value that is too low
will affect the stability of the gimbal.
Operation method:
Press the menu button, turn the dial to “Motor”, and press the right
button once to select it. Turn the dial again to “custom” and press the right button to select
it. Then, press the right button again to select the corresponding axis and rotate the dial to
set the corresponding parameter. After setting the parameter, press the left button to exit.
The gimbal will then save the parameter and display the "√" icon on the display panel to
indicate that the the auto parameter adjustment is complete.
Level:
Three motor torque levels from low to high are provided based on the combined
weight of mainstream camera lenses available on the market. Users can select the
corresponding motor torque level according to the weight of their camera and lens.
Operation method:
Press the menu button, turn the dial to “motor”, and press the right
button once to select it. Turn the dial again to select the strength “level”, and press the right
button once to enter the strength level menu. Select the corresponding strength level and
press the right button to confirm. When the display screen shows the "√" icon, it means the
level selection is complete.
①
When adjusting the motor power parameters, make sure that the lock switches of
the three axes on the gimbal are turned on, and the gimbal is upright and placed on
level ground.
②
If a load is changed, please readjust the balance and adjust the power parameters
using the method mentioned above.
③
It is recommended to use auto torque adjustment first. If auto-tuning fails to meet your
requirements, you can use custom settings to fine-tune the motor parameters. If the
above two methods still do not meet your requirements, use the level adjustment to
select the power parameters.
Motor Torque Adjustment
