7
Charging Procedure
1. Insert the batteries into the charger in the right direction (positive/negative end)
accordingly.
2. Connect the charger to the adapter via the Micro USB cable.
3. Plug the adapter into the power outlet to start charging.
1. There is a Micro USB 5V power input port on both sides of the charger,
which supports one adapter or two adapters charging simultaneously
(faster).
2. The simultaneous charging with two adapters may fail under the condition
of insufficient power supply(like when the current of adapter is below
1000mA); Adapter with higher current capacity is re commended.
3. The USB Port along side the stabilizer does not support charging to
batteries.
1.
Please use qualified standard 5V/≥2000mA adapter for battery charging;
Charging time depends on the maximum input current of the adapter.
2. The stabilizer comes standard with three high-discharge-rate dedicated
batteries. Please use and charge batteries provided or approved by
ZHIYUN only.
3. Please make sure all three batteries are fully charged. Either under
charged battery can lead to the failure of the stabilizer.
Preparing and Charging the Batteries
Micro USB Cable
Micro USB Cable
Adapter
Adapter
Power Outlet
Power Outlet
Summary of Contents for CRANE 2
Page 1: ...C R A N E 2 U s e r G u i d e Z H I Y U N E N v 2 2 0 ...
Page 41: ......