9
Installing Camera
1. Loosen mounting plate thumb screw, then press and hold the safety lock while
sliding out the quick release plate (to the opposite direction of the arrow mark
on it).
2. Install the lens to quick release plate, then tighten the 1/4’’ screw at its bottom
(as shown above)
3. Slide in the quick release plate installed with the camera following the direction
of the arrow mark on camera mounting plate, then tighten the thumb screw to
finish the installation of the quick release plate.
4. Loosen the screw on lens support and adjust the support to keep the lens firm
and stabilized, then tighten the screw.
Note: Do not power on stabilizer before finishing the camera installation.
Please hold the camera stable during the whole process in case of any
malfuntioned rotation.
Installation
Summary of Contents for CRANE 2
Page 1: ...C R A N E 2 U s e r G u i d e Z H I Y U N E N v 2 2 0 ...
Page 41: ......
