16
hurrimix
The reference figures are present on pages 3, 4, 5 and 6 of this manual and in the product Quick Guide.
EN
ChAPTER 1: INTRODUCTION
1.1
hOW TO READ AND USE ThE USE AND MAINTENANCE
MANUAL
This “Use and Maintenance Manual” provides information
regarding installation, use and maintenance for
hurrimix
automatic
mixer of alginates and plasters for dental use, manufactured by
Zhermack S.p.A.
The equipment must be used in compliance with that specified in
this Manual: it is therefore recommended that the manual is read
carefully prior to installation and start-up. Make sure that you read
the entire manual and pay particular attention to messages written
in bold type or items highlighted by boxes and/or symbols, which
highlight dangerous situations or requiring caution (see paragraph
1.2).
- The respect of standards and recommendations shown in this
Manual will ensure safe use of the equipment and appropriate
interventions on the same.
- The “Use and Maintenance Manual” is an integral part of
the equipment: it should therefore be kept together with the
equipment so that it can be consulted as and when necessary (in
a secure dry place away from sunlight, atmospheric agents, etc.)
throughout the working life of the equipment, even when the
equipment is sold or finally dismantled.
- It is advised to keep the Manual constantly updated, integrating
any amendments, additions or modifications made by the
Manufacturer. Any notes or comments should be made on the
blank pages at the rear of the Manual (see Attachments: Notes).
- Use the Manual in a way that its content is not damaged.
- Do not remove, tear or write on the Manual for any reason.
- If the Manual is lost or damaged and therefore becomes illegible,
request a new Manual from the Manufacturer.
This “Use and Maintenance Manual” is aimed at operators in order
to allow correct use of the product. The Manual contains all useful
information for declared used of the equipment; in particular the
operator will find instructions and indications regarding:
• correct installation of the equipment;
• a functional description of the equipment and all parts;
• commissioning;
• correct programmed maintenance;
• attention to the most elementary safety and accident-prevention
regulations.
This Manual is divided into 9 chapters, each referring to a specific
subject inherent to the entire equipment.
The attachments are found at the rear of the manual. They
complete the documentation.
1.2
TERMS AND SYMBOLS USED
It is fundamental that maximum attention is paid to the following
symbols and their meaning because they highlight important
information such as, critical situations, practical advice or
straightforward information.
Consult this page if in doubt regarding the meaning of the symbol
when reading the Manual.
• Any operations carried out without compliance to instructions or
tampering with equipment parts, which can cause serious injury to
persons, will be highlighted with:
DANGER!
This symbol refers to Safety Standards that MUST be
followed in order to guarantee your safety and that of
others and to prevent damage to the equipment.
• Critical situations concerning dangerous areas, situations or
operations in which failure to comply with the instructions may
render the warranty null and void, cause damage to equipment,
connected components or the surrounding area, are highlighted
by the symbol:
ATTENTION!
This symbol refers to Safety Standards that must be
followed carefully in order to guarantee your safety and
that of others and to prevent damage to the equipment.
• Any operations carried out without compliance to instructions
or tampering with equipment parts, which can cause damage
to the equipment rendering the warranty null and void, will be
highlighted with:
PROHIBITED!
This symbol calls attention to operations that are
prohibited.
• Any general information and/or useful advice referring to any
subject, will be highlighted with:
NOTE!
This symbol highlights information and/or useful advice.
ChAPTER 2: GENERAL INFORMATION
2.1
LIABILITY
Failure to comply with the instructions contained in this Use and
maintenance manual relieves the Manufacturer from any liability.
For any information not included or that cannot be deduced from
the Manual, consult the Manufacturer directly.
Zhermack S.p.A.
Via Bovazecchino, 100
45021 Badia Polesine - RO - Italy
Tel. +39 0425 597611, Fax +39 0425 53596
http://www.zhermack.com, e-mail: [email protected]
In particular, if equipment maintenance is carried out in a way that
is not in compliance with the instructions supplied, or in a way to
jeopardise integrity or modify features, Zhermack S.p.A. is relieved
from any liability inherent to safety of persons and faulty operation
of the equipments.
2.2
WARRANTY: GENERAL STANDARDS
Find the Warranty Certificate and the Identification Form attached
to this Use and Maintenance Manual, which must be filled in
completely.
Generally the warranty is rendered null and void by the following:
• improper use of the equipment;
• incorrect installation;
• negligence of envisioned maintenance;
• modifications or interventions not authorised by the Manufacturer
(especially on safety devices);
• use of non-original spare parts.
As of this moment Zhermack S.p.A. is relieved from all
liability if any type of modification or tampering is made
on the equipment without previous written authorisation
from the Manufacturer. Consequently, any repairs made
by unauthorised staff, use of non-original spare parts or
failure to comply with the installation standards specified
in this manual shall immediately render the warranty
null or void.
2.3
AUThORISED STAFF
The staff in charge of the equipment is divided into the following
categories:
Operator - user
Person trained to use the equipment. He performs all tasks
necessary for operation of the
hurrimix
mixer, such as:
use, cleaning, inspection and simple interventions linked to normal
equipment use.
The operator-user must operate with the equipment mounted
according to that stated in this manual.
Before using the equipment or carrying out any
intervention on it, the operator must read the entire
manual carefully. This manual has been drawn up to
provide the user with essential information on rational,
safe use of the equipment. The user must comply with
the information given at all times. The user must also use
the worksheets, attached to this manual, to keep a record
of maintenance interventions, component replacement
as well as make notes regarding anomalous functioning.
Maintenance technician authorised by Zhermack S.p.A.
Person who operates in all operating conditions and at all safety levels
to perform repairs/ mechanical and electric adjustments, periodic
preventive maintenance and replacement of any components.
2.4
GENERAL SAFETY PROVISIONS
The operator must comply with the advice and warnings given
below in order to ensure safe, long-lasting equipment performance:
•
do not allow untrained staff to use the equipment
;
•
prepare an optimal worktop, making sure that the operational
space is free from obstacles, clean and has suitable lighting
;
•
avoid distractions when using the equipment
;
