46
Tire inflation pressure and the general tire condition
are extremely important to the proper performance
and a safety of the vehicle. Check your tires
frequently for both wear and inflation pressure.
Replace the tire as per following stipulation.
When changing a burned bulb, the same power bulb
should be meeting. If use the improper bulb, the
whole electrical appliance may be destroyed and the
burn will burn out. “The specification “and
“electrical appliance” will give you more
information for your consideration.
WARINING:
When the bulb is very hot in “ON” position, this
condition will last for a short time after the button
was turn off. So the bulb should be cooled down
before operating.
NOTE:
Turn the igniting on “OFF” position when
changing the bulb.
Check in again after finishing the bulb changing to
make sure the new bulb can work well.
FUSE:
There is a fuse box beside the storage cell. The entire
electrical appliance is protected by a fuse. Please
check the fuse first when your motorcycle is dead.
If the fuse has burned out, that may suggest the
electrical appliance is overloaded or short-circuit.
Please trust Zhenhua dealer for your repairing.
NOTE:
Turn the igniting button on “OFF” position before
changing or inspecting fuse.
Summary of Contents for PST150-2
