4
M1 The light is on, indicating that the network port receives the
data.
M2 The light is on, indicating that the USB receives the data.
4.
Reset botton (restore factory settings
)
3
、
Product Usage Setting Instructions
3.1 Reset
As shown in picture 2, press the button to keep the four lights R1, R2, M1, M2
all on and then release, the device IP will be restored to the factory settings, the
factory setting IP address is: 192.168.0.200;
3.2 Wired communication interface Instructions
Wireless communication devices can communicate using Ethernet or USB
interfaces,which can only be communicated in one way at a time.
Support standard POE mode power supply when communicating with Ethernet
interface.
Power is supplied directly from the USB when communicating with USB
interface.
3.3 Antenna Connection
The wireless communication device has two built-in wireless modules, which
can be configured with two external antennas,when the first module fails to
communicate, it automatically switches to the second 0ne for communication to
enhance the communication success rate and reduce the blind area of
