3
4. current Temperature
5. Hanging hole
6. Locknut
7. Standar
8. Test key (no function)
9. Channel selection key (no function)
10. battery compartment case
11. Waterproof loop
12. Swift key of °
C/
°
F
STEP ONE:
BATTERIES
Insert the batteries in the transmitter unit before you set up the main unit. Do not use rechargeable batteries.
1) The outdoor transmitter is a waterproof design. The battery compartment cover is locked by nut. So before using, please
kindly unscrew the nut first.
2) Remove the battery compartment cover, then you can see the below picture:
3) Insert the batteries according to battery indicators inside the compartment.
4) After power on, the transmitter would check the current temperature and low battery. Then it would send the current data to
the receiver.
5) Every 60 seconds it would check the current data and send it to the receiver again.
6) Closed the battery compartment cover and lock with nut again.
7) You can put the outdoor transmitter in garage, on outdoor wall or window or indoor living room or in garden.
8) The valid distance for the transmitter and receiver is up to 100M in an open area.
9) Insert the batteries of the main unit.
Once the batteries are inserted
Once the batteries are inserted
Once the batteries are inserted
Once the batteries are inserted into the rece
into the rece
into the rece
into the receiver
iver
iver
iver, with a “BI” sound then enter into the normal display.
, with a “BI” sound then enter into the normal display.
, with a “BI” sound then enter into the normal display.
, with a “BI” sound then enter into the normal display.
Normal display
Normal display
Normal display
Normal display for the main unit:
for the main unit:
for the main unit:
for the main unit:
1)
Time: 0 ： 00 ： 00 with 24hrs ;Date: 1/1,2000 ,Mon.;Temperature:current temperature of the inner of the
receiver;language: English.Weather chart: no sign. The highest and lowest temperature display “- -“. Alarm1 and
alarm2: 0 : 00,and are off. Then the second and “E” sign begin flashing. It means the product is working. And it
would detect the temperature, humidity, automatically from the USB.Once it gets the signal, “E” will always display.
The indoor and outdoor temperatures begin flashing means entering into RF receiving mode for 3 minutes.When the
RF signal is registered, the transmitter will update the data and transmit to the main.The indoor and outdoor
temperatures display the current ones.
STEP TWO:
1)
Insert the CD-ROM into the computer, then a install file showed by the drive.As picture (1):
2)
Double Click the install file then the screen showed as picture (2):
