background image

 www.scheppach.com / 

 [email protected] / 

 +(49)-08223-4002-99 / 

 +(49)-08223-4002-58

GB | 29 

Turn off the engine:

•  To turn off the engine, release the drive lever (2), 

then the engine brake lever (3) and wait for the 
blades to stop.

•  Pull the spark plug boot from the spark plug (10) 

boot in order to prevent the engine from restarting.

•  Before you start the engine again, check the 

cord for the engine brake. Check that the cord is 

correctly fitted. If the cord is kinked or damaged, it 

should be replaced.

Before mowing

Important information

•  Make sure that you are properly dressed when 

mowing. Wear sturdy, non-slip footwear; do not 
wear sandals or tennis shoes.

•  Inspect the blade. A blade that is bent or damaged 

in any other way must be immediately exchanged 
for a genuine replacement blade.

• 

Do  not  fill  the  fuel  tank  indoors,  but  rather  out  in 
the open. Use a filling funnel and a measuring jug. 

Wipe off any spilled petrol.

•  Read and follow in the instructions in the operating 

manual as well as the information regarding the 
engine and accessory equipment. Store the manual 
in a place where it can be readily accessed by other 
users of the machine.

•  Exhaust gas is dangerous. Only start the engine 

out in the open.

• 

Make  sure  that  all  the  guards  are  fitted  and  that 

they are in good working order.

•  The machine should only be operated by persons 

who are well informed with the way it works, and 
who are in reasonably good physical condition.

•  It can be dangerous to mow the grass when it is 

wet. Try to ensure that you only mow the grass 
when it is dry.

•  Advise children and others to keep well away from 

the lawn mower.

•  Never mow the grass in poor visibility.
•  Remove all loose objects from the lawn before you 

start mowing the grass.(Like stones, toys, sticks 
and wires etc.)

Tips for proper mowing

m

 CAUTION! Never open the chute flap when the 

catch bag has been detached (to be emptied) and 

the engine is still running. The rotating blade can 

cause serious injuries!

Always carefully fasten the chute flap and grass bas

-

ket. Switch off the engine before emptying the grass 
basket.
Always ensure that a safe distance (provided by the 
length of the long handles) is maintained between the 
user and the mower housing. Be especially careful 
when mowing and changing direction on slopes and 
inclines. Maintain a solid footing and wear sturdy, 
non-slip footwear and long trousers. 
Always mow along the incline (not up and down).
For safety reasons, the lawn mower may not be used 

ing properly. Ensure that the tension cable can be 
smoothly operated (i.e. is not catching or kinking in 
any way).

•  Drive lever (2):

If you press this the clutch for the drive will be closed 
and the lawnmower will start to move with the motor 
running. Release the drive lever in good time to stop 
the moving lawnmower. Practice starting and stop-

ping before you use the mower for the first time until 

you are familiar with controlling the mower.

Caution: 

The blade begins to rotate as soon as the 

engine is started.

Important: 

Before you start the engine, move the 

motor brake several times to be sure that the stop 
cable is properly working.

Note: 

The engine is factory set to a speed that is op-

timal for cutting and blowing grass into the basket and 
is designed to provide many years of use.
•  Check the oil level.
• 

Open the fuel tank cap and fill the petrol tank (6) 

up to the lower point of the tank inlet with about 0.8 
litres of petrol. Use a funnel and a measuring con-

tainer for filling. Do not overfill the tank. Use fresh, 

clean unleaded fuel.
Never mix oil with petrol. Buy fuel in amounts which 
can be used within 30 days in order to guarantee 
its freshness.
Note: Use only unleaded gasoline.

m

 WARNING

Only use a safety petrol can. Do not smoke when 
fuelling. Remove any oil or petrol residues. Switch off 
the engine before refuelling and allow the engine to 
cool down for a few minutes.

Start engine (Fig. 14)

•  Ensure that the ignition cable is connected to the 

spark plug.

•  Stand behind the mower. One hand squeezes the 

engine brake lever (3) to the handle, the other pulls 
the pull start.

•  Start the engine using the reversing starter (17). To 

do this pull the handle approx. 10 – 15 cm (until you 
feel a resistance) and then start the engine with a 
sharp pull. If the engine does not start, pull the han-
dle again.

•  Due to protective coating on the engine, a small 

amount of smoke may be present during the initial 
use of the product and should be considered normal.

Note: Easier starting in colder temperatures by 

pressing the primer Fig. 14. Use only by a cold 

engine!

m

 CAUTION!

•  Never allow the starter cord to snap back.
•  Note: In cold weather, it may be necessary to re-

peat the starting process several times.

Summary of Contents for Yellow GardenLine MD510









































Reviews: