7
ASSEMBLY GUIDE
4. Assembly
4.2 Assembly Step by Step
M3.5X12
Step 11
Mount the Remote Control to the Table top as illustrated above.
Please refer to
Torque Guide
.
Step 12
Perform Zero Setting.
5. Operating Instructions
Please read below instructions carefully before operating the system.
Up
Down
5.1 Zero Setting:
When using the height adjustable frame for the first time lower the desk to the lowest height as explained below before proceeding .
•
Press ▼ button and keep pressing the button until the desktop has reached the lowest position (programmed desktop position).
•
Press ▼ button again and hold. After about five seconds, the desktop will slowly move further down until it reaches the lowest
•
possible desktop position.
•
Release ▼ button. The electric height adjustable frame is now ready for use.
Zero setting position is approximate 5mm lower than original starting height position.
Setting Button
S
Memory Position 1
1
Memory Position 3
3
Memory Position 2
2
