ZF Euro Alpi Vezzana, Use And Maintenance Manual

Page: 14 / 44

The pellet
To obtain the maximum performance, the ZF company suggests to use pellets of the quality prescribed by
the regulations DIN51731.
Length: 30mm
Diameter: 6mm
Calorific value: 4.9 ÷ 5.3 kWh / kg
Humidity max: 6%
The pellets must be stored in a dry place away from heat sources. The ZF company assumes no
responsibility for malfunction due to the use of poor quality pellets.
9 First ignition
Warning
The first ignition will have to be carried out by a qualified technician who will have to check:
-
That all the regulations mentioned above and the current regulations in the place of installation
have been applied.
-
The correct installation: of the stove, the flue, the chimney pot.
-
That there is no risk of damage to the stove or to the room of installation. In case of problems, the
ZF company assumes no liability both civil and criminal.
First steps
Check that there are no objects on the stove (manual included) and proceed as follows:
-
Fill the hopper with pellets, opening the upper door and closing it again, making sure that no
foreign body is in the hopper. Take off the cover of the hopper only during its charging.
-
Check that the brazier is well positioned in its place.
-
Check that the door is hermetically closed.
-
Supply power, put the general switch ON (it is placed in the back down side); the control display will
light up.
-
During the first few times, there may be cases of unpleasant smells due to the presence of greases
and oils on the components used during the production phase. Ventilate the space and avoid
staying there for long periods until the smells disappear.
9.1 User interface
The console unity permits to talk to the controller by simply pressing some buttons. A display and other
LED indicators inform the operator that the stove is working. In programming mode are displayed the
different parameters that can be modified by pressing some buttons.