ZF CruiseCommand 785CE, Installation And Troubleshooting Manual

Page: 107 / 160

TROUBLESHOOTING TRAIN-156 Rev.B 11/01
Page 11
• Stations 1- 4 Transfer Button Status
• Software Revision Level
A)Locate the Display on the Port or Starboard Processor. The Dis-
play will have a pattern moving from left to right which looks like
Figure 5: while the program is running:
B)Depress the Up and Down Arrow Push-buttons simultaneously.
The characters “A0 01” will be shown on the Display.
C)Depress the Up or Down Arrow Push-button repeatedly until “ H0
00 ” is displayed.
D)Depress and hold the Left and Right Arrow Push-buttons simulta-
neously until the “H0” begins to blink. Release the Push-buttons;
the applied battery voltage will now be displayed:
Figure 5: Display Pattern
Figure 6: Display Function A0
Figure 7: Display Function H0
11573A