Power_Management_1_Phase_Inv_Rev1_20160426
5
1.5
Hardware Requirements
Eversol TL – please note that this series of inverter has been discontinued;
Zeverlution S;
Evershine TL.
1.6
Software Requirements
Refer to the table below for the firmware (FW) versions that are required for each product.
Product
Firmware Version
Eversol TL
610-01023-06 or greater
Zeverlution S
610-01037-01 or greater
Evershine TL
610-01021-05 or greater
Table 2 - Firmware Versions
1.7
Power Management & EEG Set-Up – Deactivating & Activating
1.7.1
Checking Firmware Version
It is necessary to ensure that the inverter has the appropriate firmware version. For older firmware
versions it is not necessary to deactivate or activate these settings. To check the firmware version of
the single phase inverter please follow the steps outlined in Table 3.
Steps
Images
1.
Navigate to the “Version” screen by
pressing the control button on front
panel.
2.
When then “Version” screen is displayed,
press and hold the control button for
approximately 10 seconds.
3.
The firmware version will now be shown
on the LCD. Compare the version to
Table 2.
Table 3 - Firmware Version Check
1.7.2
Power Management & EEG Set-Up
Steps
Images
