4
Safety instructions:
The scanner must only be operated with a single-phasing power supply of
230 V/50 Hz with separate protective conductor. Before operation the power
supply must be checked by an authorised service engineer.
If the local power supply does not meet the above mentioned requirements,
please contact the manufacturer who will check if the scanner system can be operated
under the existing power supply conditions.
The power socket should be installed near the camera system and should be always
accessible.
It is not allowed to open the scanner system, as the system is still live even if the mains
switch is turned off.
After the scanner is switched on, the following functions will be automatically executed:
Automatic initialisation of the scanner head
Top light is automatically switched on.
The following works must be executed by service engineers only:
1.
Exchange of lamps/bulbs
2.
Exchange of camera tables, especially with book cradles
3.
Interferences in control system, power supply
It is necessary to study carefully the operator's manual before operating the scanner
system.
