zShades
HD
i
Manual
NOTICE
The information in this manual is subject to change without notice. Zetronix Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages furnishing from the furnishing or use of this material.
LED Status Indicator
Operation Mode
LED Indicator Status
Turn ON
Green LED will glow solid, when booting the LED will
glow solid then blink quickly three times when its ready
to record. (The camera will start recording
automatically after it has booted up)
Turn Off
All LEDs are off
Video Recording
A green LED will flash slowly
Memory Full
Green LED with start blinking faster for approx. 30 sec
then shut off.
Low Battery
Green LED will blank very fast for approx. 30 sec then
shut off.
Charging
Red LED will glow on.
Full Charged
Red LED will turn off.
USB Storage Mode
Green and Blue LED will glow on.
Troubleshooting
Problem:
The device seems to have frozen and isn’t reacting when any buttons are pressed.
Solution
: This usually occurs if the device receives too many commands in too short a time. To reset the device,
insert a pin into the reset hole and hold for 2 – 3 sec
Problem
: When playing back my video, I can hear audio, but have no video.
Solution
: This most often occurs if your computer’s media player is having trouble with your files. Try using
VLC player, which can be downloaded for free at
http://www.videolan.org
.
Problem
:
My video playback is “choppy” or “stuttering.”
Solution
:
If this is occurring, try copying the video files to your PC. This happens when the file is too large to be
played back using your USB connection Copy the files to your computer first them play them again.
