Zetronix zClock-200w, User Manual

Page: 22 / 31

Step 5-A
Apple Mac OSX setup
The zClock-200w can be used on an
Apple Macintosh computer as well. You will need
to find the IP address of your zClock-200w by
connecting the clock to your network with your
ethernet cord and loging into your network’s router
and consulting the list of devices connected to it.
Due to the many brands and models of routers
avialable there is no specific set of instructions to
do this. Consult the manual the came with your
router, the manufactuer of your router or your
network system administrator.
Once you have found the IP address of your
zClock-200w, open a browser such as Safari or
Firefox and type the IP adress into the address
bar. Then proceed to Step 6.