6
F. Red LED (LED Charging Light)
G. Yellow LED (LED WiFi Light)
H. Blue LED (1080P Recording Light)
I. Green LED (2K Recording Light)
PS: Blue and Green LED ( 720P recording Light)
Basic Operation
EN
1. Turning
on
to
standby
mode,
short
press
again
to
start
video
recording
To
turn
on
the
video-glasses,
simply
press
the
ON/OFF
button
for
1
second.
The
green/blue
LED
is
on
and
the
device
enters
into
the
initialization
status
and
standby
mode,
it vibrates once
and
the
green
LED
stays
on
(
the
default
is
2K,
green
LED)
,
press
shortly
again
to
start
video
recording,
it will pulse vibrate tiwce
and
the
green
LED
(
factory
default)
flashes
slowly,
it
begins
to
record
automatically.
Note:
During
recording,
green
LED
is
2K
light,
blue
LED
is
1080P
LED
light,
Blue and green LED is 720P light.
2.
Switch to standby mode(Pause mode) from recording
To
go
into
standby
mode(Pause
mode),
shortly
press
the
ON/OFF
button
for
once
while
recording.
It pulse vibrates once
and
the
LED
stops
flashing.
To
go
back
to
recording
mode,
press
ON/OFF
button
once
again.
3. Turning
off
to
stop
video
recording
To
turn
off
the
video-glasses,
press
the
ON/OFF
button
again
for
2
seconds,
it vibrates
continuously
for
3
seconds,
the
green
and
blue
LED
both
flash
fast
for
3
seconds,
the
recorder
automatically
saves
the
recording
file
and
then
turns
off.
Note:
To
limit
the
file
size,
the
recorder
will
automatically
save
the
file
every 30 minutes max and then start with a new file. It can be changed to
5 minutes,
15 minutes and 30 minutes a file in SETTING.txt.
4. How to start video recording during charging
This device can record during wall charging or power bank charging. After
connecting the power, the glasses enters into recording mode
automatically.
Note:
If you don’t want the glasses to enter into recordings automatically,
please take out the memory card before connecting the power.
5. Taking photo
There are 2 ways to take photos (Each time, it would take 1,3 or 5 photos
according to your setting):
1) During
recording,
quick press
the
ON/OFF
button
2
times
quickly,
the
device pulse vibrates once
and
the
green/blue
LED
both
on,
then
it
finished
taking
photo,
after
taken
photo,
it will pulse vibrate twice
and
go
back
to
recording
mode.
2)
During recording, short click the ON/OFF button once, it will vibrate
once, the device go into standby mode and the recording LED will
stay on. Double click the ON/OFF button, tit vibrates once and the
green/blue LED will both be on, the photo is taken. After taken photo,
it would keep
Summary of Contents for Lark zShades-2K
Page 1: ...zShades 2K USER MANUAL...
