ZETRON 4000 Series, Installation Manual

Page: 84 / 418

Common Control Equipment Installation
84 025-9533Y
two signals: a current input (+) and output (-). Table 31 identifies the pin number of the
plug on which to find the desired input signals.
Table 31: Auxiliary Inputs, Special 50-conductor Plug
 Input 40- (Ring 25) connect IRIG B - (ground)
Input 40+ (Tip 49) connect IRIG B + (IRIG B input signals)
JP3, JP4 on Auxiliary I/O Card must also be set at B position
 Input 39- (Ring 24) connect 9 or 12 V
AC
at 60Hz
Input 39+ (Ring 48) connect 9 or 12 V
AC
at 60 Hz
JP1, JP2 on Auxiliary I/O Card must also be set at B position
Input
Punch
Block Pin
Wire Color Input
Punch
Block Pin
Wire Color
2 26 White/Blue 1 1 Blue/White
4 27 White/Orange 3 2 Orange/White
6 28 White/Green 5 3 Green/White
8 29 White/Brown 7 4 Brown/White
10 30 White/Slate 9 5 Slate/White
12 31 Red/Blue 11 6 Blue/Red
14 32 Red/Orange 13 7 Orange/Red
16 33 Red/Green 15 8 Green/Red
18 34 Red/Brown 17 9 Brown/Red
20 35 Red/Slate 19 10 Slate/Red
22 36 Black/Blue 21 11 Blue/Black
24 37 Black/Orange 23 12 Orange/Black
25 38 Black/Green Ground 13 Green/Black
27 39 Black/Brown 26 14 Brown/Black
29 40 Black/Slate 28 15 Slate/Black
31 41 Yellow/Blue 30 16 Blue/Yellow
33+ 42 Yellow/Orange 32 17 Orange/Yellow
34+ 43 Yellow/Green 33- 18 Green/Yellow
35+ 44 Yellow/Brown 34- 19 Brown/Yellow
36+ 45 Yellow/Slate 35- 20 Slate/Yellow
37+ 46 Violet/Blue 36- 21 Blue/Violet
38+ 47 Violet/Orange 37- 22 Orange/Violet
39+ 48 Violet/Green 38- 23 Green/Violet
40+ 49 Violet/Brown 39-

24 Brown/Violet
Ground 50 Violet/Slate 40-

25 Slate/Violet
Note The first wire color is the main color; the second color is the stripe.