ZETRON 4000 Series, Installation Manual

Page: 345 / 418

345
RSMP Operation
This will bring up a directory selection screen (see Figure 105 ).
3. Select the destination path for the Radio System Management files. You can select
an existing drive or directory, or create a new directory (click File and New
Folder). The current path selection is shown in the text box.
4. To save changes and exit, click OK.
5. To exit without making changes, click Cancel.
Figure 105: Set Path
6. On the main screen in the Settings area, click either Automatic (24hr) or Manual.
Automatic reporting generates a 24-hour report at the specified time each day. If
Manual is selected, reports will be generated only when you click Reports and
Daily Summary from the menu.
7. On the main screen in the Settings area, check the PRINTER output Enabled box
to send reports to the printer, and check the FILE output Enabled box to send
reports to a file. Both PRINTER output Enabled and FILE output Enabled can be
checked.
8. If the FILE Output Enabled box is checked, and you want to output raw data to a
file, check the Raw data output Enabled box.
Time Updates
If the Radio System Management program is stopped and restarted (for instance if the
computer is rebooted) current data will be saved and operation will resume. The program
will retain all settings, including report time. If the Model 4048\4020 time is changed and
a previous 24-hour period has expired, the program resets its data (see Figure 106 ).