ZETRON 4000 Series, Installation Manual

Page: 321 / 418

321
System-Specific Definitions
Adding or Removing Instant Calls
You may define up to 1000 instant calls. When RDPS is first started, only one instant call
page per position is defined. When a blank is filled, another blank entry is automatically
created when ENTER is pressed over the Capcode field or by clicking NEXT. Clicking
DONE saves the entry and exits the screen. Delete users by clicking DELETE. Insert a
new entry in the middle of the list by clicking INSERT. Please note that, the new entry is
inserted
after
the currently displayed entry.
Selecting an Instant Call
The “Instant Call No.” field allows you to select the instant call to be edited by using the
Next and Previous buttons. To access a specific Instant call, type the number in the
“Instant Call No.” field and press
Enter
.
Giving the Instant Call a Name
Each instant call is identified by a 1- to 20-character, alphanumeric
Instant Call Name
.
This label may contain any printable character except commas.
Figure 87: Instant Call Page Definition
Associating the Instant Call with a Page Group
You may associate an Instant Call with a Page Group (described in the previous section)
by clicking the desired button in the Page Group column.
Caution! Spaces are allowed in the name, but cannot be adjacent to
each other. In other words, no double-spaces, triple-spaces, or
more.
!